Magnesium Chloride 46% Flakes are made from high-quality natural seawater from the Bohai Bay. They are processed through multi-stage purification, low-temperature crystallization, and precise plate-making techniques. The product is a large and flat transparent to grayish-white thin sheet with a water content of over 51%. The 46% high-concentration effective component content is stable, and the plate-like structure has a large and smooth surface area. After application, it is not easy to shift and can be easily adapted to various spreading equipment. Its cost performance far exceeds that of similar granular products.
The magnesium chloride content is 46%±0.8%, with extremely low impurity content. The aqueous solution after dissolution is pure without sediment. Compared with traditional sodium chloride, its corrosiveness is significantly reduced. Compared with calcium chloride, it has a similar de-icing speed, is less irritating to the skin, has lower toxicity, and is equally safe for the environment. It is a high-quality chemical raw material that combines efficiency and safety.
1. Low-corrosion protective facilities: It has extremely low corrosiveness to metal surfaces, effectively protecting road traffic facilities, vehicles and metal components of buildings. It erodes concrete slowly, reducing concrete spalling and freeze-thaw damage.
2. High safety and friendliness: Extremely low toxicity to humans and animals, minimal skin irritation, and no special protection required for daily operation and use. When used at the recommended dosage, it will not damage the vegetation. It is safer to use in areas such as around green belts and livestock farms.
3. Excellent environmental performance: It is easily degradable in the natural environment and leaves no residual pollution. Compared with traditional snow-melting salts and dust removal agents, it has a smaller impact on soil and water ecology, which is in line with the global environmental protection trend.
4. Strong multi-scenario adaptability: It is not only an efficient de-icing agent but also a high-quality dust removal agent. It can also be used as a pre-wetting agent for road snow-melting salts and a maintenance agent for tennis courts. Meanwhile, magnesium can be used for tire counterweights, achieving multiple uses with one material and reducing procurement costs.
5. Stable de-icing performance: The initial de-icing speed is comparable to that of calcium chloride, with a minimum practical temperature of up to 5°F (approximately -15 ° C). It can quickly melt ice and snow on the road surface and can also be pre-laid before snowfall to prevent ice and snow from freezing and adhering.
6. No residue, cleaner: No powder-like residue is left after use, no additional cleaning is required, and the road surface and site remain clean and tidy.
7. Convenient and economical application: The flaky structure of Magnesium Chloride 46% Flakes can be easily spread through various types of spusers such as household push-type and commercial spusers, and can also be mixed with abrasives such as salt and sand. Compared with granular magnesium chloride, it is more economical and cost-effective.
1. Road de-icing and ice prevention
It is applicable to winter de-icing and anti-icing operations on municipal main roads, expressways, parking lots, sidewalks, etc. It can be applied alone or in combination with road salt as a catalyst to remove ice on hard road surfaces. Pre-laying before snowfall can effectively prevent ice and snow from freezing and adhering. The initial de-icing speed is fast, the performance is stable in low-temperature environments, and it has low corrosiveness to road concrete and metal guardrails, and is safe for surrounding vegetation.
2. Dust control
With its strong hygroscopicity, Magnesium Chloride 46% Flakes can absorb moisture from the air to keep the road surface moist, bond the aggregate particles together, and effectively prevent dust from scattering. It is suitable for scenarios such as unpaved roads, construction sites, mine roads, and parking lots. The treated road surface will gradually become compact and stable. Reduce frost damage and overall wear, significantly lowering maintenance costs.
3. Professional indoor dust removal
Due to its extremely low toxicity and mild natural ingredients, Magnesium Chloride 46% Flakes have been recommended by renowned institutions such as Kentucky Racecourse and Rolex Cup for dust removal in indoor equestrian venues. With an average cost of only $0.10 per square foot, it can completely solve the problem of dust in the venue, creating a clean and safe sports environment for horses and riders. It is currently the most economical and effective dust removal solution for equestrian venues.
As a source Factory deeply engaged in Chemical processing for 20 years, Golden Chemical has established a full-chain quality control system to ensure the stable quality of each batch of Magnesium Chloride 46% Flakes:
1. Raw material selection: Only high-quality natural seawater from the Bohai Bay is selected. Impurities are removed through multi-stage filtration, laying a solid foundation for the high quality of the product.
2. Strict process control: Automated low-temperature crystallization and plate-making processes are adopted, with real-time monitoring of key parameters to ensure uniform flake morphology, stable content of active ingredients, and performance differences between batches of no more than 0.5%.
3. Comprehensive inspection: Before leaving the factory, the finished products must undergo 18 tests including magnesium chloride content, impurities, solubility, corrosiveness, etc. Each batch of products is accompanied by a detailed inspection report, supporting full traceability throughout the process.
4. Compliance Certification: We have passed the ISO9001-2008 quality management system certification and the EU REACH registration. Our products can be directly exported to multiple regions such as the EU, the Middle East, and North America. For export orders, we can provide authoritative SGS test reports.
If you need Magnesium Chloride 46% Flakes, or would like to know about product quotations, sample applications, application plans and other information, please feel free to contact us!
Address
Sales Office:No. 1, Taihangshan Road, Sophia International Center, Qingdao City, Shandong Province, China
Factory Site:No.1, Cuijia Village, Houzhen,Shouguang City, Shandong, China
Tel
